HOME > PRODUCTS > ENG PART
제품 바로가기
Products

PRODUCTS

타이틀

CUSTOMER SATISFACTION
ENG PART

CAM SHAFT

CAM SHAFT (4 wheels)
Gray Casting Iron CamShaft
Hollow Assembly CamShaft
  • Model
    Epsilon-ENG, Kappa-ENG, Theta-ENG, Lambda-ENG, 4D56-ENG, 4D31-ENG, 4D34-ENG and ETC.
  • Description
    In internal combustion engines with pistons, the camshaft is used to operate poppet valves. It then consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes protruding from it, one for each valve. The cams force the valves open by pressing on the valve, or on some intermediate mechanism as they rotate.
CAM SHAFT (2 wheels)
  • Description
    In internal combustion engines with pistons, the camshaft is used to operate poppet valves. It then consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes protruding from it, one for each valve. The cams force the valves open by pressing on the valve, or on some intermediate mechanism as they rotate.
CAM SHAFT (Motor Boat (Marine))
  • Description
    In internal combustion engines with pistons, the camshaft is used to operate poppet valves. It then consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes protruding from it, one for each valve. The cams force the valves open by pressing on the valve, or on some intermediate mechanism as they rotate.

P.C.V.VALVE

P.C.V.VALVE
  • Description
    The PCV valve is only one part of the PCV system, which is essentially a variable and calibrated air leak, whereby the engine returns its crankcase combustion gases. Instead of the gases being vented to the atmosphere, gases are fed back into the intake manifold, to re-enter the combustion chamber as part of a fresh charge of air and fuel.

TURBOCHARGER

TURBINE HOUSING (Turbine part of exhaust)
BEARING HOUSING (Transmission spindle part of torque compressure and connection part of turbine)
  • Description
    This is an engine after spin turbine by using discharge gas pressure of engine which occur from internal combustion engine as a necessity and using this turning force, push inhaling air in more high-pressure than air pressure to increase power.

TAPER PLUG

TAPER PLUG
  • Model
    AUTO T/M (ALL)
  • Description
    TAPER PLUG is equipped at Cylinder block, head and T/M case and TAPER PLUG can stop outflow of OIL by blocking GALLERY HOLE

OIL JET ASS'Y

OIL JET ASS'Y
  • Model
    A-ENG, Θ-ENG, S-ENG, 4D56-ENG, T/G-ENG, τ-ENG
  • Description
    It is a critical component which is installed at bottom part of OIL path inside of CYLINDER BLOCK and when alternating motion of PISTON, spray OIL around a PISTONPIN and then get cooling and lubrication effect between PISTON and CYLINDER BORE

AUTO TENSIONER

AUTO TENSIONER
  • Model
    SIR-I, SIR-II, δ-ENG, Σ-ENG
  • Description
    AUTO-TENSIONER plays a role in controlling tension of the TIMING BELT, which conveys power to the CAM shaft, CRANK shaft, and OIL PUMP shaft. Ignition time of ENGINE, opening and shutting time of intake-exhaust VALVE and fuel injection time, etc. effect the big change of TENSION of the BELT that conveys power. Therefore, the function is very important, and it is an essential component which has improvement functions of noise and vibration of BELT and endurance

ARM TENSIONER

ARM TENSIONER
  • Model
    XG, LX, EF, Y-3, LZ-V8
  • Description
    ARM TENSIONER is a component which role is a shaft to connect for control the TIMING BELT’s tension of DOHC ENG. The AUTO-TENSIONER operates when the engine accelerates at the point of 20kg.m power is generated and the auto-controlled power plays a role to transfer to ARM ASSY TENSIONER and control tension of TIMING BELT constantly.

ETC

ETC
  • PLUG
    Model : Passenger / Commercial (ALL)
  • ADAPTER CRANK SHAFT
    Model : AUTO T/M Dedicated(SONATA、 MOHAVE、 SOUL、 STAREX
  • EYE BOLT
    Model : Passenger / Commercial (ALL)
  • GUIDE V/V
    Model : KAPPA1.6HEV. / 감마-ENG
  • FIX BOLT-OIL COOLER
    Model : 감마-ENG, U-ENG, KAPPA-ENG